The capability stack
Slice by slice: the reactive power a modelled 300 MW offshore wind park can deliver at its connection point, and where it falls short.
01/ 03Expertise
Power & Energy Engineering
Studies and software for grids, substations and power plants.
We model power systems and build the software around them: load flow, short-circuit and reactive power capability studies, substation automation following IEC 61850, protection coordination and grid connection checks.
Each project below was computed on our own model of a representative system. The charts and 3D views are drawn from the results, and every number on a page says how it was measured.
- Load flow & short circuit
- Reactive power capability
- IEC 61850 substation automation
- Protection coordination
- Grid connection studies
- Interactive 3D views of results
Projects 04
Substation, compiled
Our IEC 61850-6 file for a representative 110/20 kV substation becomes its topology, its interlocking, its power flows and its 3D yard.
Fault, cleared
A fault at any board of a 2N data-centre power train we modelled: which breaker clears it, and how far the arc-flash boundary reaches on utility supply and on generator.
The extra containers
Two simulated battery parks run through ten real years of German power prices. One chases every spread and the other prices its own wear, and the crane comes for both.
Have a problem like this one?
Tell us what you need to compute, simulate or decide, and we will tell you how we would approach it.